Step-by-Step Guide: Removing Oakley Lenses

So you’ve got a pair of Oakley sunglasses and you want to change the lenses? Well, look no further because I’m here to give you a step-by-step guide on how to remove those lenses with ease. Whether you want to switch out the lenses for a different color or replace them altogether, I’ve got you covered. No need to stress or struggle, just follow along and soon enough you’ll be sporting a brand new pair of shades.

Step-by-Step Guide: Removing Oakley Lenses

When it comes to taking care of your Oakley sunglasses, knowing how to properly remove the lenses is an essential skill. Whether you need to clean the lenses or replace them with new ones, this step-by-step guide will walk you through the process. So, gather the necessary materials and let’s get started!

Step 1: Gather the necessary materials

Before you begin removing your Oakley lenses, make sure you have all the required materials at hand. Here’s a quick checklist:


To avoid leaving fingerprints and smudges on the lenses, it’s crucial to wear gloves while handling them. Opt for gloves made of a non-scratch material to protect the lenses from any accidental damage.

Clean cloth

Having a clean cloth is essential for wiping away any dirt or debris from the lenses and frame. Make sure the cloth is soft and free of any particles that could scratch the lenses.

Lens case or soft pouch

When you remove the lenses, it’s important to store them in a safe place. Avoid placing them directly on hard surfaces to prevent scratches. Using a lens case or a soft pouch will provide proper protection while keeping them accessible.

Lens cleaning solution

To achieve a thorough and streak-free clean, having a lens cleaning solution is highly recommended. Look for a solution specifically designed for eyewear that won’t damage the lenses or any lens coating.

Lens replacement if needed

If you’re planning to replace the lenses, make sure you have the correct replacement lenses for your Oakley model. Inspect the new lens for any defects or scratches before installation.

Step 2: Ensure a clean working area

Before you start removing the lenses, it’s important to prepare your workspace. Find a well-lit area with good lighting to ensure you can properly see what you’re doing. Clear any objects that might obstruct your workspace, giving yourself ample room to work comfortably. Additionally, placing a clean cloth or towel on the surface will provide a soft and clean area to lay down your Oakley sunglasses.

Step-by-Step Guide: Removing Oakley Lenses

Step 3: Put on gloves

Now that you have your workspace ready, it’s time to put on your gloves. Wearing gloves will prevent any fingerprints or smudges from transferring onto the lenses, ensuring a clean and clear view when you put them back in. Select gloves made of a non-scratch material to avoid any accidental damage to the lenses.

Step 4: Open the frame

To access the lenses, you’ll need to open the frame of your Oakley sunglasses. Locate the hinge area, which is typically where the temples connect to the front of the frame. Gently open the frame, maintaining a secure grip on it with one hand throughout the process.

Step-by-Step Guide: Removing Oakley Lenses

Step 5: Identify the lens mounting method

Different Oakley models may have different lens mounting mechanisms. It’s important to identify the mounting method specific to your sunglasses to ensure you remove the lenses correctly. Common methods include rimless, semi-rimless, or full frame.

Step 6: Release the lens from the mounting

Now that you know the lens mounting method of your Oakley sunglasses, you can proceed with detaching the lenses. Follow the instructions based on your specific lens mounting method:

For rimless lenses:

If your Oakley sunglasses have rimless lenses, you’ll need to locate the small screws or bolts holding the lens in place. Use a small screwdriver to carefully remove these screws, making sure to keep them in a safe place to avoid losing any of them.

For semi-rimless lenses:

For Oakley sunglasses with semi-rimless lenses, look for metal or plastic tabs securing the lens. Gently push or slide these tabs to release the lens from the frame. Be cautious not to apply too much force, as you don’t want to damage the frame or lens.

For full-frame lenses:

In the case of Oakley sunglasses with full-frame lenses, hold the frame firmly in one hand. With your other hand, gently push the lens from the back towards the front, popping it out of the frame. Take care not to exert too much pressure and ensure a controlled release.

Step-by-Step Guide: Removing Oakley Lenses

Step 7: Place the removed lens in a safe location

After successfully removing the lens from your Oakley sunglasses, it’s crucial to handle it with care. Avoid placing the lens directly on hard surfaces to prevent any scratches. Instead, use a lens case or a soft pouch that will keep it protected until you’re ready to clean or replace it.

Step 8: Clean the frame and lens cavity

Before you proceed with inserting the new lens, take some time to clean the frame and lens cavity. Use a clean cloth or lens cleaning solution to wipe away any dirt, dust, or fingerprints from the frame. Pay close attention to hard-to-reach areas, ensuring the frame is clean and ready for the new lens. Inspect the lens cavity for any remaining dirt or debris and remove it carefully.

Step-by-Step Guide: Removing Oakley Lenses

Step 9: Prepare the new lens

If you’re replacing the lens, it’s essential to ensure the new one is compatible with your specific Oakley model. Check that the replacement lens matches the dimensions and mounting style of the original lens. Before installation, remove any protective film or packaging from the replacement lens. Take a close look at the lens, inspecting for defects or scratches that may affect your vision.

Step 10: Insert the new lens into the frame

With the new lens properly prepared, it’s time to insert it back into the frame of your Oakley sunglasses. Follow the specific instructions for your particular Oakley model, taking into account the lens mounting method:

For rimless lenses:

Align the replacement lens correctly with the frame’s lens cavity, ensuring it sits securely. Using the small screws or bolts you removed earlier, carefully secure the lens back in place. Be cautious not to overtighten the screws, as this could damage the lens or frame.

For semi-rimless lenses:

Slide or snap the replacement lens into the metal or plastic tabs, making sure it fits snugly within the frame. Ensure the lens is securely seated and properly aligned with the frame.

For full-frame lenses:

Align the replacement lens correctly with the lens cavity of the frame. Hold the frame firmly and push the lens firmly from the back until you hear and feel a satisfying click, indicating that the lens has been securely inserted.

By following these ten steps, you’ll be able to successfully remove the lenses from your Oakley sunglasses. Remember to take your time, follow the instructions specific to your Oakley model, and handle the lenses and frame with care. Whether you’re cleaning or replacing the lenses, this process will allow you to maintain the quality and longevity of your Oakley sunglasses.

Step-by-Step Guide: Removing Oakley Lenses


Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *